TECHNICAL SPECIFICATIONS MECHANICAL AND FUNCTIONAL SPECIFICATIONS CLASS III MICROBIOLOGICAL SAFETY CABINET √ Manufactured in accordance with EN12469:2000 standard √ State of the art microprocessor control system √ Main switch with removable key √ Soft touch keyboard √ Bar graph for exhaust air flow conditions; permanent display √ Alarms for low air flow √ Sloped front for the most comfortable access √ Front and side access for filter maintenance and service √ C-shaped support stand for easy one man installation procedure √ Transfer hatch with interlocked doors (right or left positioned) √ Class III cabinet with exclusive three filter design and Class 100 inner chamber. √ Sloped front design for the highest operational comfort. √ Stainless Steel internal surfaces with 2B finishing √ Liquid retaining work surface (Stainless Steel 2B finishing) √ Total visibility air and aerosol-tight front window equipped with robust gloves (Class III) for the safest operation when working with Risk Group 4 pathogens. √ Class III: Exclusive four filter design for the highest safety of the environment and the operator (Risk Group 4 pathogens): one (1) prefilter, one (1) HEPA H14 In-Let, two (2) HEPA H14 Exhaust Filters. √ H14 class High Efficiency Particulate Air filters with 99.995% efficiency on MPPS (most penetrating particle size) (EN1822-1 and EN 13091:1999 tested and certified) √ Filter change and maintenance from the front of the cabinet. √ Exhaust transitions easily installable. √ Anti-blow-back valve available as add-on option √ Key operated. The key can be removed when the unit is in SAFE mode, in order to avoid unwanted operation. In case of power failure, the cabinet is re-set to original working conditions. √ Self calibration cycle performed when cabinet is switched on. √ High speed rinse and set up cycle performed, before reaching the SAFE operating mode. √ Visual display of SAFE conditions. Pre-warning before actual alarm conditions are reached (visual and acoustic alarms) √ Soft touch control with keys for standard service utilities. Interconnected UV and fluorescent lights. √ 100% air exhaust. √ Light intensity on work surface > 1000 lux. √ Noise level ≤58 dB(A) √ Work surface displacement (vibration) <0.005mm RMS between 20Hz and 20,000Hz (ISO 5349 tested and certified) √ 230V, 50Hz (230V,60Hz also available) √ Max power (for each power point): 3Amps. √ Microprocessor equipped with analogical watch-dog. √ Leakage tested in agreement with EN 12469 and ISO10648.2 √ CE certification according to Machinery Directive 2006/42/CEE
RkJQdWJsaXNoZXIy MjgzNzA=