Particle filter type HEPA (high efficiency particulate air) H14. These filters are especially suitable when the products handled are in solid state or produce mists like the case of hydrochloric acid. Through the mechanisms of interception, impact and diffusion the percentage of retention of this filter is greater than 99.995% of filtered particles. The particles with size of 0.3 μm are the ones that have the maximum penetration in front of these 3 mechanisms. Filter equipped with an electronic device to control the hours of life and the expiration date. TECHNICAL FEATURES Type of filter References of Cruma range Initial pressure drop Nominal flow rate Filter efficiency Size of the seal Manufacturing materials Electronics Product shelf life HEPA H14 Reference Sizes (AxBxC) Weight FL001 728x390x55 3,5 Kg FL002 528x390x55 3 Kg FL003 700x480x69 5 Kg FL004 1100x480x69 8 Kg FL005 822x665x69 8 Kg FL006 1220x665x69 11 Kg 120 Pa 320 m3/h 99,995% 10 mm Galvanized steel or aluminum, depending on the chosen model USB device with data of expiry date 5 years FILTERING SYSTEM The flow to be treated enters from the lower part of the filter, passes through a mesh of randomly arranged glass fibers, retaining the particles through the mechanisms of interception, impact and diffusion. After this, the air leaves from the upper part of the filter with a more proportioned air flow than in the inlet. This factor is very important if an activated carbon filer is placed after the hepa filter. WASTE MANAGEMENT Code EWC 150202-150203 Non-contractual technical data. CRUMA reserves the right to modify the present document without prior notice. All the trademarks mentioned in this document belong to their respective owner. STRUCTURE Galvanized steel or aluminum, depending on the chosen model. QUALITY Each filter is supplied with a quality control certificate that mentions the serial number, the initial pressure drop and the efficiency. The filter has been subjected to a test according to the EN 1822 standard. A B C www.cruma.es +34 93 370 61 62 - export@cruma.es This filter must be stored in its original packaging, in a plain and dry place Information and storage Do you need technical assistance? Our technical assistance service gives answers and solutions everywhere; Ask us if you have any question or need replacements, revisions, maintenance, etc. +34 93 370 61 62 Handle by the edges to avoid damaging the filtering surface. At the time of filter the change, do not shake. Look at the info supplied by the manufacturer Direction of fl ow of inhaled air Maximum humidity of storage Storage temperature range Expiry date yyy/mm <xx% -xx oC +yy oC Warnings HIGH EFFICIENCY PARTICULATE AIR FILTER
RkJQdWJsaXNoZXIy MjgzNzA=