MOLECULAR ACTIVE CARBON FILTER Developed to filter small amounts of vapors of formaldehyde, glutaraldehyde and derivatives; it is eventually good to filter other organic compounds.. Filter made from coconut shell carbon with a potassium iodide impregnation with a 590 Kg/m3 of apparent density. Filter equipped with an electronic device to control hours of use and expiry date. CERTIFICADO DE CALIDAD DEL FILTRO CRUMA QUALITY CERTIFICATE OF CRUMA FILTER www.cruma.es CRUMA������������������������������������������������������������������������������������������������������� ��������������������������������CRUMA��CRUMA�R���A�R���� CRUMA������������������������������������������������������������t� be����d�����������������������CRUMA��CRUMA�R�����A�R���� TIPO DE FILTRO / TYPE OF FILTER ��M�R�������������CAC����������UM��R ��M�R�������R�������R�A���UM��R ��C�A�����A�R�CAC������MA�U�AC�UR���A�� C�R����CA������CUM���M����� C����A����RMA���A���������RAC��� C�R�������������C�M���A�� �������������RA�������A��AR�� ������� A���R��������� �����������15 ��RMA���A������A�R�CAC��� MA�U�AC�UR������A��AR�� *FEChA DE CADUCIDAD / ����R���A�� �������������������������������������������������������������������� ��������������������������������������������������������������������������������������������� ����������������������������������������������������������������������������C���������������������������� To be sure����������������������������������������������������������������������������� ���������������������C���������������������������������������� The flow to be treated enters the lower part of the filter through the grid, is then distributed equally on the filtration surface before crossing the bed of active carbon and going out through the top of the filter. This distribution allows avoiding the creation of preferred paths. The filling of activated carbon is made through the upper opening, letting it rest on a polyester grid. Code EWC 190110 Non-contractual technical data. CRUMA reserves the right to modify the present document without prior notice. All the trademark mentioned in this document belong to their respective owner. Anticorrosive structure, assembled by thermoforming, divided and sealed to homogenize and avoid preferred air ways. Each filter is supplied with a quality control certificate that mentions the filter serial number, the manufacturing date and expiration date. The activated carbon contained in the filter has been submitted to a test according to the following standards: √ ASTM D2867-83 Standard Test Methods for Moisture in Activated Carbon √ ASTM D2862-83 Test Method for Particle Size Distribution of Granular Activated Carbon √ ASTM D2866-83 Test Method for Total Ash Content of Activated Carbon √ ASTM D2854-83 Test Method for Apparent Density of Activated Carbon FILTERING SYSTEM WASTE MANAGEMENT STRUCTURE QUALITY www.cruma.es +34 93 370 61 62 - export@cruma.es This filter must be stored in its original packaging, in a plain and dry place Information and storage Do you need technical assistance? Our technical assistance service gives answers and solutions everywhere; Ask us if you have any question or need replacements, revisions, maintenance, etc. +34 93 370 61 62 The activated carbon is not a dangerous product; nevertheless, when it is powdery you must use respiratory and ocular protection. In addition, the use of gloves is recommended. Look at the info supplied by the manufacturer Direction of fl ow of inhaled air Maximum humidity of storage Storage temperature range Expiry date yyy/mm <xx% -xx oC +yy oC Warnings Type of carbon Reference of Cruma range Pre filter Sizes Carbon volume Size of the seal Total weight Reference of previous ranges Manufacturing materials Electronics Product shelf life Retention capacity F F001 / F002 Efficiency of the prefilter 99.5% for 5 microns 728 x390 x55 8 Kg distributed in 8 compartments 10 mm 8.5 Kg CRUMAIR 9000F, AIRNET 900F, CAPTAIR CAPF Thermoforming sheets USB device with data of expiry date 2 years after manufacturing date if conserved in its original packaging It will depend on the type of product, working conditions, temperature and other factors that can affect the retention capacity TECHNICAL FEATURES
RkJQdWJsaXNoZXIy MjgzNzA=