DYNAMIC PASS-TROLLEY [DPT] STATIC PASS-TROLLEY [PT] Complete system for the passage of materials on the ground between two or more environments. Fully integrated and flush-fitted on the partition wall. The door wings are made from the same profile as the anodised aluminium doors, FULLGLASS glass and 45 mm thick internal partition wall type panel. Floor connections with R70 coving profiles. Complete with stainless steel handles, mechanical lock with anti-scratch latch, perimeter sealing gaskets and air-stops at floor. Complete system for the passage of materials on the ground between two or more environments. The door wings are completely integrated and flush-fitted with the partition walls and made from the same profile as the anodised aluminium doors, FULLGLASS glass and partition wall type 45 mm thick internal panelling. Floor connections with R70 coving profile. Complete with stainless steel handles, mechanical lock with anti-scratch latch, perimeter sealing gaskets and air-stops at floor. Exterior colour See chart 1.1 Partition Walls - Composition. Standard size LxHxW – 1000x1500x1270 mm - 1500x1500x1270 mm (or other as requested by the Customer) +AIRY · Version designed to connect to the central laminar flow system. Made with perforated stainless steel grille on one side and hole for the absolute filter on the top. +UV · Version with 2 UV-C type germicidal lamps installed on the top. +COM · Version designed to accommodate a concealed flush-fitted intercom, with protective membrane, inside the door frame. This solution allows for easy hands-free communication between operators who are on either side of the pass-trolley, thanks to the high performance of the device. +SS · Version with internal scotch-brite finish stainless steel coating. +OUT · Version for column installation in environments without Easypharma partition walls. +COM · Version designed to accommodate a concealed flush-fitted intercom, with protective membrane, inside the door frame. This solution allows for easy hands-free communication between operators who are on either side of the pass-trolley, thanks to the high performance of the device. +OUT · Version for column installation in environments without Easypharma partition walls. Included accessories • Complete electronic interlock system and EASY LIGHTS programmable timer. (see 2.2 Doors - Accessories) • High-efficiency HEPA FILTER H14 fluid seal, easy to remove and change from below - RSC (room side change) • Stainless steel perforated grille positioned on the side support surface, easily removed for cleaning. • Centrifugal backward curved radial fan with directly coupled inverter motor: power supply 230V, 50/60 Hz • LED indicator for checking and managing the cleaning status of the H14 absolute filter • No. 2 UV/C type germicide lamps inserted in the top section of the pass-trolley Electrical wiring, connectors, flow channelling duct and accessories installed and tested during the manufacturing phases Exterior colour See chart 1.1 > Partition Walls - Composition Standard size LxHxW – 1000x1500x1270 mm - 1500x1500x1270 mm (or other as requested by the Customer) P_55
RkJQdWJsaXNoZXIy MjgzNzA=