Pag. 4 of 19 Disclaimer: The reported images show typical installation configurations of the described products, and therefore they are not binding. Please refer to the economic offer for precise set-up of offered items. h. Assembly of structure is achieved through threaded inserts, pressure-applied to the steel sheets, and with no use of self-tapping screws: this grants no loosening of the holes following to re-assembly of the furniture with possibility of virtually infinite re-configurations; i. Front vertically sliding sash realized with safety glass installed in epoxy-powder coated steel frame; j. Glass having 6.38 mm thickness (2 x 3 mm safety glass + 0.38 mm rubber film holding preventing formation of sharp shards in case of breakage and preventing sheet’s collapse), classified 2(B)2 acc.to EN 12600:04 and compliant to EN ISO 12543; k. Counter-balancing system for sliding sash located in the back of the Fume Cupboards for its smooth and safe displacement, easily accessible for prompt maintenance; l. Suspension cords for the sash made up of 7x19 braided AISI 316 Stainless Steel wires, running on frictionless wheels operating on ball bearings; m. Fall-prevention system for front sash, stopping free falling on operators’ hands in case of failure of one or both the suspension cords; n. Operational Sash Opening Stopper (500 mm from worktop level, acc.to EN 14175), over-ridable with a deliberate act of the Operator;
RkJQdWJsaXNoZXIy MjgzNzA=