Pag. 10 of 19 Disclaimer: The reported images show typical installation configurations of the described products, and therefore they are not binding. Please refer to the economic offer for precise set-up of offered items. f. Disposal line for the Working area, with following features: i. Waste Disposal (Shredder): Stainless Steel basin is manufactured with a slight slope leading to a drainage, connected to a waste disposal line with a shredder machine, operable by the operator through a pneumatic button installed in the working area; ii. Double-channel Waste line: waste from the basin can be routed, at operator’s choice, either into the urban-waste network or into the Disposal tank for Formaldheyde; iii. Control Panel for waste lines: located in the front area of the grossing station, below the worktop level, the panel is made-up of two PVC ball valves with large cross-section, used by the operator to route the wastes either into the urban network or into the disposal tank. g. Extra-tall Water faucet, with spring: provided on the side of the working area, allows to properly and evenly wash the entire surface by reaching all its corner with a power flow water-jet;
RkJQdWJsaXNoZXIy MjgzNzA=