5/7 Smart Compressed Air System Monitoring Software SUTO Sensors and Devices Modbus Analog & Pulse Analog & Pulse Modbus SUTO SDI and Modbus/RTU sensors as well as analogue sensors can be connected to the S4M SaaS within minutes. To properly connect the Modbus/RTU sensors to an RS 485 bus system, it's recommended to daisy-chain the sensors to one of the inputs. For this purpose, SUTO offers an RS 485 splitter to simplify the connection. In this way, users can connect up to 16 sensors to the S331 master input. This makes it possible to monitor entire plants with the S4M SaaS using a single data logger. S4M SaaS Cloud Service Connect up to 16 Modbus/RTU sensors, 2 analog sensors and 2 SDI sensors to a single data logger Data Analysis Data Logging Data Logger and Display Field Devices Third Party Devices Plug & Play gateway and central interface between field devices and S4M SaaS monitoring solution. Using the industry standard Modbus/RTU protocol, third party sensors and devices can be easily integrated into the S4M SaaS via the S331 Data Logger Gateway. Field devices can be easily set up using the configuration software, allowing a thirdparty sensor to be added in seconds. Of course, all connected sensor data can be logged in the internal memory and used for virtual channel calculations. At the same time, real-time values are sent to S4M SaaS and stored securely. S331
RkJQdWJsaXNoZXIy MjgzNzA=