2/5 Accessories Order No. Description Application Picture C190 0002 Closing cap for S421/S452 material: 1.4404 To close the measuring sections in case the sensor unit is removed A695 0009 Thread adapter, G 1/2” internal to PT 1/2” external, SUS303 Used to adapt S401 or S450 to a PT thread ball valve A695 0008 Thread adapter, G 1/2” internal to NPT 1/2” external, SUS303 Used to adapt S401 or S450 to a NPT thread ball valve C190 0116 Flow conditioner Wafer type flow conditioners, which is flanged between two flanges 5-8 times diameter upstream of the flow meter. Please specify nominal pipe diameter and pressure A530 1105 / A530 1106 / A530 1111 / A530 1113 High pressure installation device. To be used for pressure > 1.5 MPa For safety reasons we recommend using this installation device whenever the operating pressure exceeds 1.5 MPa * A530 1105 - High pressure installation device for S401-220 mm * A530 1106 - High pressure installation device for S450-220 mm * A530 1111 - High pressure installation device for S401-400 mm * A530 1113 - High pressure installation device for S450-400 mm A530 1206 SUTO Spot Drilling Set for 1/2" and 3/4" access points, including 13 mm and 19 mm drills + all required accessories This drilling tool is used to drill holes into compressed air pipes under pressure through a ball valve A553 0104 Sensor cable 5 m with M12 connector, open wires, AWG 24 (0.2 mm²) 5 pole cable, used to connect sensors to display, data loggers and third-party systems A553 0105 Sensor cable 10 m with M12 connector, open wires, AWG 24 (0.2 mm²) 5 pole cable, used to connect sensors to display, data loggers and third-party systems A553 0146 Sensor cable 5 m with M12 and RJ45 connectors, PoE supported, AWG 24 (0.2 mm²) Used to connect SUTO flow sensor with Modbus/TCP to the local network. A553 0161 M8 female to M12 male converter cable Used to connect the S415/S418 to a Modbus/RTU splitter Ordering Please use the following table to assist in placing your order with our sales staff.
RkJQdWJsaXNoZXIy MjgzNzA=