4/5 Accessories Order No. Description Application Picture A699 3491 Measuring chamber, 2 l/min @ 0.8 MPa, fast connector, without filter, max pressure 1.5 MPa(g), suitable for all SUTO dew point sensors For easy connection and disconnection to compressed air system through quick-disconnector A699 3492 Measuring chamber, 2 l/min @ 0.8 MPa, 6 mm hose quick connector, without filter, max. pressure 1.5 MPa(g), suitable for all SUTO dew point sensors For easy connection and disconnection to compressed air system through quick-disconnector A699 3493 By-pass-type chamber with 6 mm hose in and out connection up to 1.5 MPa(g) This chamber can be used in applications where the measured gas is by-passed through the chamber A699 3500 Measuring chamber, 4 l/min @ 0.8 MPa, hose fast connector, with filter, recommended pressure range 0.3 ... 1.5 MPa, convenient dew point measurement of gas/air with SUTO portable dew point meters The sample gas/air is connected to the chamber through a 6 mm Teflon® hose The chamber is mounted to the SUTO portable dew point meters through the 1/2“ G-type thread connection. Parking and measurement position is selected through the handle at the chamber, which allows quick measurement results A699 3501 By-pass-type chamber with 6 mm hose in and out connection up to 1 MPa, convenient dew point measurement of gas/air with SUTO portable dew point meters This chamber can be used in applications where the measured gas is by-passed through the chamber to avoid any gas/air loss. The chamber is mounted to the SUTO portable dew point meters through the 1/2“ G-type thread connection Parking and measurement position is selected through the handle at the chamber, which allows quick measurement results A699 3496 Measuring chamber for dryer installation, 2 l/min @ 0.8 MPa, hose fast connector, without filter, max. pressure 1.6 MPa The sample gas/air is connected to the chamber through a 6 mm Teflon® hose The chamber is mounted to stationary S2XX dew point sensors through the 1/2“ G-type thread connection. This chamber can be conveniently mounted to the frame or cabinet of a dryer A699 3590 High pressure chamber up to 35 MPa In applications where the pressure is exceeding 1.5 MPa, this chamber can be used. Through the adjustable valve a small purge is set to ensure a gas flow through the sensor element (response time) A554 0054 Compressed air quick coupling, female side R ½” thread Connect this quick coupling to a 1/2’’ ball valve to set up a quick connector for measurement of dew point, oil and particle Dew point sensor protection caps Protection caps are used to protect the dew point sensor element from mechanical impacts or dust. The proper cap selection depends in application Please contact customer service Ordering Please use the following table to assist in placing your order with our sales staff.
RkJQdWJsaXNoZXIy MjgzNzA=