S211/S215/S220 Dew Point Transmitters www.suto-itec.com sales@suto-itec.com International Edition (EN) - 24-1. © 2024 SUTO iTEC GmbH. www.suto-itec.com Ordering Please use the following tables to assist in placing your order with our sales staff. Similar to illustration and pictures / MODBUS® word mark and logos Registered trademark of the Modbus Organization, Hopkinton, USA 2-wire Analog & SDI output 3-wire Analog & SDI output 3-wire Analog & Modbus/RTU*3 output 3-wire Analog & Modbus/RTU*3 output With Pressure Sensor Transmitter Model and Range Order No. Order No. Order No. Order No. S215 Dew Point Transmitter -20 ... +50 °C Td S699 1215 S699 2215 S699 3215 S699 4215 S211 Dew Point Transmitter -60 ... +20 °C Td S699 1211 S699 2211 S699 3211 S699 4211 S220 Dew Point Transmitter -100 ... +20 °C Td S699 1220 S699 2220 S699 3220 S699 4220 Options Operating Pressure 0 ... 1.6 MPa A1380 A1380 A1380 A1380 Operating Pressure 0 ... 35.0 MPa A1381*1 A1381*1 A1381*1 N/A*2 Without Display A1389 A1389 A1389 A1389 With OLED Display N/A*2 A1387 A1388 A1388 *¹ A1381: The high pressure option is only available for the models S215 and S211. The S220 can not be used in pressure applications > 1.6 MPa *² N/A: This option is not available for these models *³ Standard Modbus/RTU Settings are Slave Address: last two digits of serial number / Com. Settings: 19200 baud, 8/N/1 Accessories Order No. Description A699 3491 Measuring chamber with quick connector, up to 1.6 MPa, 2 l/min purge @ 0.8 MPa A699 3493 Measuring chamber by-pass, up to 1.6 MPa, 6 mm hose connection as in- and outlet A699 3590 High pressure measuring chamber, up to 35.0 MPa, G 1/4” inner thread process connection A553 0104 Sensor cable, 5 m with M12 connector, open wires, AWG 24 (0.2 mm²) A553 0105 Sensor cable, 10 m with M12 connector, open wires, AWG 24 (0.2 mm²) Output Unit The dew point Transmitter is available with different measurement units for dew point, humidity, temperature and pressure. Standard is: Dew point = °C Td / Temperature = °C / Pressure = bar If you would like to have a different unit as output, please specify it at the order or use the optional Service Kit with the Service Software to change the output unit. For example pressure in PSI or humidity in ppmv. Ordering Example Example: S211 -60...+20 °C Td, 3-wire analog & Modbus/RTU, 0...1.6 Mpa operating pressure, without display Order Code: S699 3211.A1380.A1389
RkJQdWJsaXNoZXIy MjgzNzA=