קטלוג מוצרים ULPA - SUTO

Benefits 2/4 DIR1 DIR2 3 2 1 S409 Thermal Mass Flow Direction Switch Accurate and fast detection of the flow direction Detects smallest changes < 0.1 m/s referred to 20 °C and 1000 hpa No mechanical wear parts for long term stable measurements Easy installation under pressure without stopping the operation Through a 1/2”G-type ball valve the switch can be inserted into the pipe under pressure without shutting down the system. Flexible Installation 2 The thermal mass flow sensor element comes with main advantages: • Very robust and completely of stainless steel • Fast response times and wide measuring range at high accuracy • Minimal pressure loss Thermal Mass Flow Sensor 3 The thermal mass flow direction switch S409 allows the detection of direction of the flow. It can be used in compressed air and non-corrosive gases. The flow and direction information is output through 2 normally open relay switches. The signals can be transferred to the SUTO flow sensor to activate and deactivate the flow measurement depending on the flow direction, as well as triggering which consumption counter is used. Operation Principle IP65 casing provides robust protection in rough industrial environments to ensure reliable measurement results. Robust Materials 1 Relay output at switch DIR1 DIR2 Pin arrangement of flow switch Pin1 Pin2 Pin3 Pin4 Pin5 A SDI -VB +VB DIR1 DIR1 B SDI -VB +VB DIR2 DIR2 Flow Flow Pin assignment connector Connection 4 2 3 1 4 5 4 Ø12 mm

RkJQdWJsaXNoZXIy MjgzNzA=